First Edited, August 10th, 2019. | Last Edited, August 14th, 2019.
Fitting your cover:
The InsuCover fits on your van using both front doors to securely hold it in place.
Once on the van the door mirrors and wiper blades also help keep the cover in place.
The easiest way to fit it is to open one door and hook the cover over it. Close the door and take the cover round to the other side and hook over your other door.
Whilst closing your other door, adjust the positioning of the cover.
Finally, put your windscreen wipers on top of the cover.
To clean your cover:
Use warm soapy water (washing up liquid is fine), and sponge the cover down. Probably easiest done while in place on your van.
Don't put it in a washing machine! The various proofing treatments will not withstand this.
If any oil or grease gets on the cover, a degreaser such as Gunk can be used.
It is best not to cover a dirty van, but if any dirt does get on the underside of the cover, again sponge it off with warm soapy water.
- Try not to cover a wet van. When it freezes the cover will stick to the windscreen.
- Beware of any sharp points or rusty edges. Unless covered with an old glove or something similar, they are likely to tear the cover.
- Try not to cover a dirty van.